
Nano Nucleating Agent Masterbatch is in masterbatch form. When used in film extrusion, it provides a surface for fast crystal formation. Cycle times in injection molding are reduced for optimal efficiency. Mechanical properties like flexural modulus, strength, heat-distortion temperature and hardness will increase. This product is designed in nano form and the clarity and transmittance is therefore significantly improved.
Applications
1) Injection Molding 2) Thermoforming 3) Extrusion Blow molding 4) Rotomolding 5) Extrusion 6) Blown Film Example: pallet shrink wrap film, broom and MOP packaging film and many other applications
Advantages
- Speeds up the crystal morphology
- Enhanced mechanical properties (impact strength, tensile strength, tensile elongation, flexural strength).
- Significantly improve the clarity and transmittance
Method of Use
Suitable polymers / materials: PP, PE, LLDPE, EPE Advantages: recommended dual-screw extruder
Comparison Test Results
Linear low density polyethylene (LLDPE) Stretch Wrap: Film thickness reduced by 20% when adding MB-PP!
| Formulation | Add 4% MB-PP | Original | Original |
|---|---|---|---|
| Film thickness | 12um | 14um | 15um |
| Tearing strength (g) MD | 16 | 16 | 16 |
| Tearing strength (g) CD | 307 | 321 | 336 |
| Tensile strength (kg/cm^2) MD | 536 | 540 | 557 |
| Tensile strength (kg/cm^2) CD | 184 | 188 | 210 |
| Elongation(%) MD | 480 | 478 | 523 |
| Elongation(%) CD | 754 | 750 | 798 |
| Young's modulus (kg/mm^2) MD | 8.18 | 8.24 | 9.14 |
| Young's modulus (kg/mm^2) CD | 10.85 | 10.38 | 10.35 |
| Haze % | 1.1 | 1.3 | 1.6 |
| Gloss % | 149 | 147 | 146 |
| Adhesion (g/30cm) | 13.7 | 9.8 | 10.2 |
| Thrust resistance (kg) | 7.1 | 5.9 | 7.8 |
12um PE Film
| Formulation | Maximum | Breaking % |
|---|---|---|
| Add 30% Metallocene PE | 0.86 | 373.494 |
| Add 30% Metallocene PE | 1.00 | 389.848 |
| Add 30% Metallocene PE | 0.98 | 392.228 |
| Add 3% MB-PP | 1.02 | 440.418 |
| Add 3% MB-PP | 0.98 | 423.94 |
| Add 3% MB-PP | 1.00 | 441.556 |
| Add 5% MB-PP | 1.06 | 472.032 |
| Add 5% MB-PP | 1.06 | 484.49 |
| Add 5% MB-PP | 1.15 | 545.834 |
| Competition Product | 1.06 | 399.186 |
| Competition Product | 1.25 | 447.544 |
| Competition Product | 1.25 | 496.616 |
Expandable Polyethylene: Mechanical Strength
| Mechanical strength | Method | Add 5% talc powder | Add 5% SiO2 | Add 5% MB-PP |
|---|---|---|---|---|
| Flexural Strength kg/cm^2 | ASTM D790 | 104.83 | 103.87 | 109.53 |
| Tensile Strength kg/cm^2 | ASTM D638 | 114.7 | 119 | 126.5 |
| Impact strength kg/cm^2 | ASTM D256 | 114.7 | 119 | 126.5 |
Price
Request Quote
Port of Origin: Shanghai
1 Pallet
Compare Products
Applications
Recommended
Limited Suitability
Not Recommended
COATINGS
Automotive Coating
Industrial Coating
Decorative Coating
Coil Coating
Wood Coating
Powder Coating
PLASTICS
PVC
PE/PP/PO
ABS
PS
PA
Rubber
INKS
Offset
Solvent based
Water based
UV / EB
Inkjet
Acrylic
Logistics, shelf life and storage
Port of Origin 1
Shanghai
Port of Origin 2
Kaohsiung
Packaging
Paper Bag
Net Kg/Unit Primary
25.0
Gross Kg/Unit Primary
25.2
Shipping Net Kg/Pallet
1000.0
Net MT/20ft FCL
20.0
# of Pallets per 20ft FCL
20.0
Shelf Life
2 years from manufacturing date.
Pal Length
1.15
Pal Width
1.15
Pal Height
1.15
Lead Time (days)
30