
DA27K is a 100% active APE-free content polymeric dispersant which improves pigment dispersion and stability in aqueous paints and inks.
Applications
- Waterbase Paint
- Waterbase Ink
- Universal Tinters
Advantages
- Nonyl phenyl ethoxylate (NPE)-free / Alkylphenol ethoxylate (APE)-free
- Increased pigment wetting and tinctorial properties
- Improve performance of poor wetting resins
- Produces highly pigmented concentrates making it ideal for mixing schemes
- Excellent storage stability
Method of Use
- DA27K must be added at the millbase or dispersion stage. It is recommended that the grinding medium for resin-containing dispersions should consist of a 10-30% resin solid solution.
- DA27K will reduce viscosity, the pigment concentration in the millbase may need to be increased to maintain adequate millbase viscosity / shear for efficient dispersion.
- Addition levels should be based on the surface area of the pigment / filler. The dosage level is usually 2mg active dispersant per square meter of pigment surface area (the pigment surface area divided by 5).
Order of Addition
- Dissolve the DA27K dispersant in water.
- If required, add the synergist DA12K and stir evenly.
- Add defoamer (if necessary).
- Add resin (in the case of resin-containing dispersions)
- Add the pigment in stages and disperse in normal manner.
Heavy Metal Content
| CONTENT | Sb | As | Ba | Cd | Cr | Pb | Hg | Se | Zn |
|---|---|---|---|---|---|---|---|---|---|
| ppm | <40 | <15 | <25 | <40 | <15 | <20 | <15 | <15 | <25 |
Typical Formulations (Waterbased Packaging Inks)
The table below shows a range of typical resin-containing, acrylic solution formulations for waterbased concentrates. % in Millbase
| Pigment CI # | Pigment | 24% NEOCRYL BT-26 | Water | DMEA | DA27K | DA12K |
|---|---|---|---|---|---|---|
| PY13 | 40 | 24.99 | 32.45 | 0.14 | 2.42 | -- |
| PR57:1 | 30 | 28.16 | 39.26 | 0.18 | 2.40 | -- |
| PR184 | 40 | 23.65 | 33.00 | 0.14 | 3.21 | -- |
| PB15:3 | 40 | 23.00 | 32.42 | 0.14 | 4.00 | 0.44 |
| PB15:4 | 40 | 27.93 | 27.92 | 0.15 | 4.00 | -- |
| PG7 | 50 | 18.75 | 26.14 | 0.11 | 5.00 | -- |
| PBL7 | 35 | 25.18 | 35.12 | 0.15 | 4.55 | -- |
| PW6 | 75 | 10.10 | 14.15 | -- | 0.75 | -- |
1. A 10% resin solid solution grinding medium was used in the formulations. 2. NEOCRYL BT-26 is supplied at 45% resin solids, hence the solution was diluted into 24% prior to use. See below for it’s preparation.
| 1 | Water | 24.6 |
|---|---|---|
| 2 | DMEA | 1.9 |
| * Mix together than add | ||
| 3 | DEHYDRAN 1293 (Cognis) | 0.5 |
| 4 | Isopropanol | 11.0 |
| * Stir the above then add to | ||
| 5 | 45% NEOCRYL BT-26 | 62.0 |
| 100 |
Typical Formulations (Universal Decorative Tinters & Waterbased Paints)
1. Resin Compatibility – DA27K based tinters have shown excellent universal compatibility in a wide range of water and solvent based paints:
| Long Oil Alkyd | Mineral Spirit |
|---|---|
| Acrylic Emulsion | Water |
| Urethane Long Oil Alkyd | Mineral Spirit |
| Short Oil Alkyd Styrenated | Industrial Organic Solvents |
| Acrylic | Industrial Organic Solvents |
| Acrylic Resin Modified with Epoxy Ester | Water |
| Polyurethane Modified Alkyd | Industrial Organic Solvents |
| Styrene Acrylic | Water |
| Epoxy | Solvent |
| High Solids Polyurethane | Solvent |
2. Below chart shows a range of typical starting formulations for Organic Based Universal Decorative Tinters.
| Pigment CI # | Pigment % | Talc | DA27K | Water | PG |
|---|---|---|---|---|---|
| PY74 | 35.00 | 10.00 | 2.40 | 26.30 | 26.30 |
| PR112 | 22.50 | 10.00 | 1.44 | 33.03 | 33.03 |
| PB15:3 | 25.00 | 15.00 | 6.00 | 27.00 | 27.00 |
| PG7 | 35.00 | 10.00 | 6.75 | 24.12 | 24.12 |
| PV23 | 25.00 | 15.00 | 7.26 | 25.38 | 25.38 |
*PG=Propylene Glycol 3. Below chart shows a range of typical RESIN CONTAINING formulations for water based concentrates using Laropal LR8991. % in Millbase
| Pigment CI # | Pigment % | Water | Defoamer 1 | Defoamer 2 | Laropal | Biocide | DA27K |
|---|---|---|---|---|---|---|---|
| PY74 | 45.0 | 10.80 | 0.3 | 0.2 | 41.80 | 0.10 | 1.80 |
| PY42 | 50.0 | 25.47 | 0.3 | 0.2 | 21.43 | 0.10 | 2.50 |
| PB15:3 | 27.5 | 14.23 | 0.3 | 0.2 | 54.37 | 0.10 | 3.30 |
| PG7 | 35.0 | 11.83 | 0.3 | 0.2 | 45.57 | 0.10 | 7.00 |
| PW6 | 73.0 | 12.74 | 0.3 | 0.2 | 10.01 | 0.10 | 3.65 |
| PBL7 | 38.0 | 19.86 | 0.3 | 0.2 | 36.80 | 0.10 | 4.75 |
*Defoamer 1 (BYK019) *Defoamer 2 (BYK024) *Biocide (Proxel GXL) 4. Below chart shows a range of typical RESIN CONTAINING formulations for water based concentrates using Laropal 9008. % in Millbase
| Pigment CI # | Pigment % | Water | Defoamer 1 | Defoamer 2 | Laropal | Biocide | DA27K |
|---|---|---|---|---|---|---|---|
| PY74 | 45.0 | 14.60 | 0.3 | 0.2 | 38.00 | 0.10 | 1.80 |
| PY42 | 50.0 | 27.40 | 0.3 | 0.2 | 19.50 | 0.10 | 2.50 |
| PB15:3 | 27.5 | 19.17 | 0.3 | 0.2 | 49.43 | 0.10 | 3.30 |
| PG7 | 35.0 | 15.97 | 0.3 | 0.2 | 41.43 | 0.10 | 7.00 |
| PW6 | 73.0 | 14.75 | 0.3 | 0.2 | 8.00 | 0.10 | 3.65 |
| PBL7 | 38.0 | 23.31 | 0.3 | 0.2 | 33.35 | 0.09 | 4.75 |
*Defoamer 1 (BYK019) *Defoamer 2 (BYK024) *Biocide (Proxel GXL) 5. Below chart shows a range of typical RESIN FREE formulations for water based concentrates. % in Millbase
| Pigment CI # | Pigment % | Water | Defoamer* | Humectant* | DMAMP80 | DA27K | DA12K |
|---|---|---|---|---|---|---|---|
| PY74 | 48.0 | 38.56 | 1.00A | 5.0 | 1.2 | 6.24 | -- |
| PY154 | 40.0 | 51.30 | 0.50B | 5.0 | 1.2 | 2.00 | -- |
| PR122 | 32.0 | 53.90 | 0.30B | 5.0 | 1.2 | 7.60 | -- |
| PR254 | 50.0 | 41.00 | 0.30B | 5.0 | 1.2 | 2.50 | -- |
| PV23 | 40.0 | 46.14 | 0.20B | 5.0 | 2.0 | 6.66 | -- |
| PB15:2 | 42.0 | 43.20 | 0.20B | 5.0 | 1.2 | 8.40 | -- |
| PB15:4 | 30.0 | 57.70 | 0.70B | 5.0 | 1.2 | 5.40 | -- |
| PG7 | 55.0 | 31.40 | 0.80B | 5.0 | 1.2 | 6.60 | -- |
| PG36 | 52.0 | 38.38 | 0.30B | 5.0 | 1.2 | 3.12 | -- |
| PBL7 | 45.0 | 46.00 | 0.10B | 5.0 | 1.2 | 2.70 | -- |
| PBL7(2) | 20.0 | 68.80 | 0.30B | 5.00 | 1.5 | 12.80 | 1.60 |
*Defoamer A=Dehydran 1620; B=Rhodoline DF6681 *Humectant GRB2 or Propylene Glycol
Price
Request Quote
Port of Origin: Keelung, Taiwan
1 Pallet
Compare Products
Technical Data
C.I. No.: N/A
CAS No.: N/A
Chemical Group: APE-free Polymeric Dispersant
Physical Data
Density (g/cm³)
1.13
Form of supply
Amber Liquid
Colour, Gardner scale (Gardner)
≤8
Active content (%)
100
Boiling point (°C)
>100
Flash point (°C)
>325
Applications
Recommended
Limited Suitability
Not Recommended
COATINGS
Automotive Coating
Industrial Coating
Decorative Coating
Coil Coating
Wood Coating
Powder Coating
PLASTICS
PVC
PE/PP/PO
ABS
PS
PA
Rubber
INKS
Offset
Solvent based
Water based
UV / EB
Inkjet
Acrylic
Logistics, shelf life and storage
Port of Origin 1
Keelung, Taiwan
Port of Origin 2
Kaohsiung
Packaging
25 kg HDPE pail; 200 kg HDPE drum; 1000 kg IBC
Net Kg/Unit Primary
200.0
Gross Kg/Unit Primary
218.0
Shipping Net Kg/Pallet
800.0
Net MT/20ft FCL
16.0
# of Pallets per 20ft FCL
20.0
Shelf Life
5 years from manufacturing date.
Storage
Store under normal temperatures, dry and protected from weather.
Other Info in TDS
Waterbase ink and paint. More info in TDS
Pal Length
1.15
Pal Width
1.15
Pal Height
1.15
Lead Time (days)
30
