
HD-PM70 is a masterbatch containing 70% of a mineral filler and a medium concentration of white pearlescent pigment. It has low density and provides improved dead fold and good UV-barriers properties. It generates almost no shiny spots defects on high output machine equipped with cascade extruders as main extrusion system and is suitable for metallisable films. The white opaque film can be made as plain or as coextruded film. HD-PM70 is compatible with PP homopolymer used for the production of very heavy gauge film and white pearlized BOPP films on stenter lines.
Food Contact Statement
We certify that the components of this product fulfill the requirements on products, as articles or components of articles, intended for use in contact with food, as described in the latest revisions of food contact regulations:
EC-Member States
We consider that Directive 2007/19/EC (2002/72/EC amendment) relating to plastic materials and articles intended to come into contact with foodstuffs is immediately applicable in all countries which have adopted the EU-regulation (A, B, D, DK, E, F, GB, GR, I, IRL, L, NL, P, S and SF) or in countries which have adopted equivalent legislations (CH, N).
USA-FDA
All polymers and additives entering into the composition of above mentioned product, appear in the positive list of products accepted for the fabrication of packing materials intended for food contact, as published by the Food and Drug Administration (USA): The base resin meets the FDA 21 CFR 177.1520 It is the responsibility of the converter or food packager that markets the final material or article to guarantee its compliance under actual and foreseeable conditions of use, and to check it on a regular basis. The finished material or article should be technically suitable for the intended use Ref: Code of federal regulations 21 parts 170 to 199
Price
Request Quote
Port of Origin: Shanghai
1 Pallet
Compare Products
Physical Data
Density (g/cm³)
1.73 ± 0.05
Moisture
≤ 1500ppm
Content (%)
70.0
Average particle size
≤1.5μ m
Melt Flow Index (MFI)
8.2
Bulk Density
950 ± 50 kg/m³
Bulk density (kg/m³)
950 ± 50
Applications
Recommended
Limited Suitability
Not Recommended
COATINGS
Automotive Coating
Industrial Coating
Decorative Coating
Coil Coating
Wood Coating
Powder Coating
PLASTICS
PVC
PE/PP/PO
ABS
PS
PA
Rubber
INKS
Offset
Solvent based
Water based
UV / EB
Inkjet
Acrylic
Logistics, shelf life and storage
Port of Origin 1
Shanghai
Shipping Net Kg/Pallet
1000
Pal Length
1.15
Pal Width
1.15
Pal Height
1.15
Lead Time (days)
30