
ATS46 is a combined antistatic and slip masterbatch for high quality BOPP films with 40% super high additive content. This masterbatch is especially suitable for BOPP films requiring moderate COF and good gloss, such as printing films, paper-plastic composite films, heat sealing films, etc. Low COF and excellent optical and physical properties can be maintained at high temperature. The addition of ATS46 can reduce film breakages and damages caused by die head dropping and TDO oil stains. No negative effect on post processing, such as printing, lamination, bag making, corona, etc.
Agency Ratings
- EU NO 10/2011
- FDA21 CFR 177.1520
Usage
Processing Method:
- Cast Film
- Blown Film
- Oriented Flat Film
Recommended Dosage: 0.5%-2.0% in core layer
Storage
Although no known shelf life has been determined for this concentrate. Our recommends that ATS46 be stored at room temperature (25°C or so) and used within 12 months of purchase for optimum performance. Long-term or high temperature storage may cause blocking or color burn. There’s no negative effect on masterbatch property to use.
Packing
Anti-moisture paper-plastic bag, 25 kg per bag.
Safety
Please refer to the MSDS for additional safety information.
Price
Request Quote
Port of Origin: Shanghai
1 Pallet
Compare Products
Physical Data
Density (g/cm³)
0.93 ± 0.05
Form of supply
Pale Yellow
Moisture
≤ 5000ppm
Content (%)
40.0
Forms
Short chip
Melt Flow Index (MFI)
17.8
Base Resin
Homopolymer PP
Bulk Density
550 ± 50 kg/m³
Bulk density (kg/m³)
550 ± 50
Applications
Recommended
Limited Suitability
Not Recommended
COATINGS
Automotive Coating
Industrial Coating
Decorative Coating
Coil Coating
Wood Coating
Powder Coating
PLASTICS
PVC
PE/PP/PO
ABS
PS
PA
Rubber
INKS
Offset
Solvent based
Water based
UV / EB
Inkjet
Acrylic
Logistics, shelf life and storage
Port of Origin 1
Shanghai
Shipping Net Kg/Pallet
1000
Pal Length
1.15
Pal Width
1.15
Pal Height
1.15
Lead Time (days)
30